Voltas 5 Star Inverter Split AC

Voltas 5 Star Inverter Split AC SPECIFICATIONS

General

 Noise

 Cooling Performance

 Modes

 Remote Control

 Filters

 Convenience Features

 Body Design Features

 Air Flow Features

 Services Installation

What is Inverter Air Conditioner?

The inverter technology works like an accelerator in a car. When compressor needs more power, it gives it more power. When it needs less power, it gives less power. With this technology, the compressor is always on, but draws less power or more power depending on the temperature of the incoming air and the level set in the thermostat. The speed and power of the compressor is adjusted appropriately. This technology was developed in Japan and is being used there successfully for air conditioners and refrigerators. This technology is currently available only in split air conditioners.

What is benefit of Inverter Technology?

Every air conditioner is designed for a maximum peak load. So a 1.5 ton AC is designed for a certain size of room and 1 ton for a different size. But not all rooms are of same size. A regular air conditioner of 1.5ton capacity will always run at peak power requirement when the compressor is running. An air conditioner with inverter technology will run continuously but will draw only that much power that is required to keep the temperature stable at the level desired. So it kind of automatically adjusts its capacity based on the requirement of the room it is cooling. Thus drawing much less power and consuming lesser units of electricity.

Although air conditioner with Inverter Technology adjusts its capacity based on the room requirement, it is very important to install a right sized air conditioner in a room. Please make sure that you evaluate the room and air conditioner capacity before you make a purchase.

Are Inverter technology air conditioners slow in cooling?

Several people have concerns that Inverter Technology air conditioners do not cool well or cool slowly. Non inverter ACs are fixed speed ACs, where as inverter ACs are variable speed ACs. Non inverter ACs have compressors that go “On” and “Off”. Whereas inverter ACs have compressors that are “On” all the time. As non inverter ACs are sized for peak summer heat load, they are over-sized all the other times (in fact most of the time people oversize even for peak summer season). The drawback of the same is that the AC “Over cools” most of the time. So if you set AC at temperature of 25, it will cool it down to 23 or 22. Now one would question: then what is the use of thermostat? Well the thermostat (in a non inverter AC) switches off the compressor when the outside temperature has reached 25. But a lot has happened before that. In an AC, refrigerant moves from liquid to gas (by taking heat from the room) and then back from gas to liquid as the compressor compresses it. But if the refrigerant is more and heat in the room is less (which happens in over sized AC), it does not get enough heat from the room to convert from liquid to gas and it keeps moving as liquid. Now when the thermostat detects temperature and switches off the compressor, the refrigerant still remains in liquid state and thus has capacity to take heat from room to convert to gas. And so it takes more heat from the room and cools the room below the set temperature.